Q: Q355プレートの最小切断サイズはどれくらいですか?
A: 最小切断サイズは切断方法と板厚によって異なります。
火炎切断: 最小長さ/幅 100mm 以上
プラズマ切断: 最小長さ/幅 50mm 以上
レーザー切断: 最小長さ/幅 10 mm 以上小さいサイズの要件については、微細な切断サービスを提供するか、他の加工方法を推奨します。**
Q: Q355プレートを円弧に曲げることはできますか?
A: Yes. Q355 plate has good plasticity and can be bent into circular arcs of various radii. The minimum bending radius is related to the plate thickness and grade: for plates with thickness ≤10mm, the minimum bending radius is about 2 times the plate thickness; for plates with thickness >最小曲げ半径は10mm、板厚の約3~5倍となります。厚板の場合、割れを防ぐため熱間曲げ加工をお勧めします。
Q: Q355 プレートの納品状態はどのようなものですか?
A: 一般的な配送状態は次のとおりです。
熱間圧延状態(HR): 最も一般的な出荷状態で、低コストで、ほとんどの構造部品に適しています。
正規化状態 (N): プレートは 900-950 度に加熱され、その後空冷され、粒子サイズが均一で、靭性と溶接性が向上し、より高い性能要件が求められる構造部品に適しています。
焼き戻し状態(T):プレートを一定の温度に加熱した後、冷却することで内部応力が低く、精密構造部品に適しています。**
Q: Q355の板厚の公差はどのくらいですか?
A: GB/T 3274-2017 によると、Q355 プレートの厚さの公差は、通常の公差と精密公差に分けられます。
Normal tolerance: for plates with thickness ≤16mm, the tolerance is ±0.5mm; for plates with thickness 16-40mm, the tolerance is ±0.8mm; for plates with thickness >40mm、公差は±1.0mmです。
Precise tolerance: for plates with thickness ≤16mm, the tolerance is ±0.3mm; for plates with thickness 16-40mm, the tolerance is ±0.5mm; for plates with thickness >40mm、公差は±0.8mmです。お客様のご要望に応じて正確な公差のプレートを提供できます。**
Q:Q355プレートの重量計算式は何ですか?
A:Q355板の重量計算式は、重量(kg){{1}}厚さ(mm)×幅(m)×長さ(m)×密度(7.85g/cm3)例:厚さ10mm、幅2m、長さ6mのQ355板の場合、重さは10×2×6×7.85=942kgとなります。

